macOS Setup - ZoogVPN

Before we start an active ZoogVPN subscription is required and your device must be connected to the Internet.

We highly recommend our official macOS app based on IKEv2 and OpenVPN, instead of a manual setup. It takes a few seconds to install and it is more secure as we have some additional features in our apps including DNS leak protection, IP leak protection, and more!

Get MacOS app

Сhoose the preferred VPN protocol:

OpenVPN App (Recommended)

Step 1 – Download Tunnelblick OpenVPN Client

Click the ‘Download Tunnelblick’ button and choose ‘Stable’ release from the Tunnelblick website.

DOWNLOAD Tunnelblick

Once the download is complete, double click on the .dmg file to install Tunnelblick.

Step 2 – Download Configuration Files

Bulk Download – On your macOS device download OpenVPN Configuration Files. Unzip the archive file and save the folder on your device’s SD card for later use.

Single File Download – Choose your desired location and tap on the Download icon to download the OpenVPN configuration file. We recommend using ‘TCP’ only when ‘UDP’ is not available or when a more secure VPN connection is required.

You can find the list of available servers here.

Step 3 – Import Configuration Files

Unzip the archive file, to import the configuration files, simply select all, right-click and choose ‘Open with Tunnelblick’.

Step 4 – Launching Zoog VPN Tunnelblick Client

NB: To launch Tunnelblick Client, if not already running, go to Launchpad and click on ‘Tunnelblick’.

Accept all the system prompts to complete the import.

You will then be asked to enter your ZoogVPN account credentials. Your username is basically the email address of your ZoogVPN account. Your password is the password you used when creating your ZoogVPN account. You can also tick ‘Save In Keychain’ for the client to remember your login details.

Upon successful connection, you will see a screen with a confirmation of successful connection. That’s it! It’s that simple.

To disconnect click on the ‘Disconnect’ button on the status screen (above) or click on the Zoog VPN Tunnelblick Client icon on the Finder bar, followed by ‘Disconnect’.

Check that the flag next to your username has now turned to your desired server country flag. You may need to press the ‘Refresh’ button for it to appear.

Uninstalling Tunelblick OpenVPN Client

Click the ‘DOWNLOAD’ button below to download Tunnelblick Uninstaller.

DOWNLOAD

Once the download completes double click to uninstall your current version of Tunnelblick.

Enjoy! You have now taken control of your Internet freedom, privacy, and security.

Don’t forget to connect with us on Facebook and Twitter. We strongly encourage Free Plan users to show their support on social media. Thank you.

Didn’t find an answer to your question? Contact our 24/7 customer support team here.

IKEv2 (Setup)

Step 1 – Click on ‘System Settings’

Click on ‘System Settings’ on your Mac’s dock.

Step 2 – Click on the ‘Network’ Icon

Click on the VPN tab in the ‘System Settings’ window.

Step 3 – Add VPN Configuration

Click ‘Add VPN Configuration’ to create a new VPN connection.

Choose the IKEv2…. option to proceed.

Step 4 – VPN Settings

For ‘Server Address’ and ‘Remote ID,’ choose a VPN server to enter the Server Address. You can find all available server addresses in your account here. For example, server address can look like this: nl.free.zoogvpn.com

To ensure fast internet speed, it’s recommended to connect to the nearest VPN server to your current location

Step 5 – Change ‘Authentication Type’

In the ‘Authentication’ section, change the field Type from ‘None’ to ‘Username’.

Your username is basically the email address of your ZoogVPN account.

Your password is the password you used when creating your ZoogVPN account.
Once entered, click the ‘Create’ button.

That’s it! You can now connect to ZoogVPN IKEv2 by pressing the toggle switch.

Step 6 – Connected to ZoogVPN IKEv2

Once you are connected, you should see ‘Status: Connected’ on the top of the ‘Network’ window. To disconnect from ZoogVPN IKEv2, simply click on the toggle switch again.

Enjoy! You have now taken control of your Internet freedom, privacy, and security.

Don’t forget to connect with us on Facebook and Twitter. We strongly encourage Free Plan users to show their support on social media. Thank you.

Didn’t find an answer to your question? Contact our 24/7 customer support team here.

PPTP (Setup)

Step 1 – Click on ‘System Preferences

Click on ‘System Preferences’ on your Mac’s dock.

Step 2 – Click on ‘Network’ Icon

In the ‘System Preferences’ window, click on the ‘Network’ icon.

Step 3 – Create VPN Connection

Click ‘+’ to create a new VPN connection.

Step 4 – Select Interface & Enter Service Name

For ‘Interface’ select ‘VPN’, for ‘VPN Type’ select ‘PPTP’ and for ‘Service Name’ enter ‘Zoog PPTP VPN’. Once entered click on the ‘Create’ button.

Step 5 – VPN Settings

For ‘Server Name/Address’ choose a VPN server to enter the Server Address. You can find all available server addresses in your account here. For example server address can look like this: nl.free.zoogvpn.com

To ensure fast internet speed, it’s recommended to connect to the nearest VPN server.

For ‘Account Name’ enter Zoog VPN login email address and set ‘Encryption’ to ‘None’. Once entered click on the ‘Authentication Settings…’ button.

Step 6 – Change ‘Authentication Settings’

Under ‘Authentication Settings’ enter your ZoogVPN account credentials. Your username is basically the email address of your ZoogVPN account. Your password is the password you used when creating your ZoogVPN account. Once entered click the ‘OK’ button.

Step 7 – ‘Send all traffic over VPN connection’

Under ‘Options’ Tick the box ‘Send all traffic over VPN connection’ and click the ‘OK’ button.

Step 8 – Apply VPN Settings

Click the ‘Apply’ button on the main ‘Network’ window. That’s it! You can now connect to Zoog PPTP VPN by clicking on the ‘Connect’ button.

Step 9 – Connected to Zoog PPTP VPN

Once you are connected, you should see ‘Status: Connected’ on the top of the ‘Network’ window. In order to disconnect from Zoog PPTP VPN, simply click on the ‘Disconnect’ button.

Check that the flag next to your username has now turned to your desired server country flag. You may need to press the ‘Refresh’ button for it to appear.

Enjoy! You have now taken control of your Internet freedom, privacy, and security.

Don’t forget to connect with us on Facebook and Twitter. We strongly encourage Free Plan users to show their support on social media. Thank you.

Didn’t find an answer to your question? Contact our 24/7 customer support team here.

Back to VPN setup

Help Center

Mac OS Setup

Сhoose the preferred VPN protocol:

OpenVPN App (Recommended)

Works with macOS 10.11+ (Version: 1.0, Beta)

Step 1 – Download Tunnelblick OpenVPN Client

Step 2 – Download Configuration Files

Step 3 – Import Configuration Files

Step 4 – Launching Zoog VPN Tunnelblick Client

Uninstalling Tunelblick OpenVPN Client

Didn’t find an answer to your question? Contact our 24/7 customer support team here.

IKEv2 (Setup)

Works with macOS 10.11+ (Version: 1.0, Beta)

Step 1 – Click on ‘System Settings’

Step 2 – Click on the ‘Network’ Icon

Step 3 – Add VPN Configuration

Step 4 – VPN Settings

Step 5 – Change ‘Authentication Type’

Step 6 – Connected to ZoogVPN IKEv2

Didn’t find an answer to your question? Contact our 24/7 customer support team here.

PPTP (Setup)

Works with macOS 10.11+ (Version: 1.0, Beta)

Step 1 – Click on ‘System Preferences

Step 2 – Click on ‘Network’ Icon

Step 3 – Create VPN Connection

Step 4 – Select Interface & Enter Service Name

Step 5 – VPN Settings

Step 6 – Change ‘Authentication Settings’

Step 7 – ‘Send all traffic over VPN connection’

Step 8 – Apply VPN Settings

Step 9 – Connected to Zoog PPTP VPN

Didn’t find an answer to your question? Contact our 24/7 customer support team here.

Comments are closed

About ZoogVPN

Help and Support

Partnership

Exclusive VPN Deal

Try Premium risk-free